Audio mixer is capable of receiving number of audio signals from variety of sources and mixing before amplification.

• Gain Control Level --- to allow input signal adjustment to the optimal level
• High, mid, and low equalizer for signal inputs
• Two Aux outputs one placed before channel fader and the other after
• Peak Indicator --- to detect the level of the signal at a point after EQ with warning lights for level of signal above 3dB and before approaching clipping level
• PFL Switch --- to check the input signal of a specific channel or trouble-shoot a channel
• Channel Fader --- to control the output level of input channel signal, adjusting volume balance between channels
• Balance Control --- for left and right location of stereo input signal
• Stereo left and right Master Control --- for final signal level of the outputs
• Aux Return --- for two channels control of the input levels form the effect units connected to aux return.
• Aux Send --- for two channels to adjust the level of signals that are output to Aux Send
•  Output Level Meter --- for right and left channels
• Tape Inputs with Control
• Microphone In --- at least three XLR microphone inputs
• Line In --- to allow balanced phone jack inputs for equipment with line-level audio outputs (minimum 12 stereo inputs)
• Record Output

• Inputs:
  • Microphone IN --- Gain Trim, 2.5K ohms inputs impedance and 50-600 ohms (microphone) nominal, sensitivity input level (nominal) (–60) dB Max. and (-14) dB Min., Standard XLR connector
  • Line IN --- Gain Trim, 47K ohms input impedance and 600 ohms (line) nominal, sensitivity input level (nominal) (-36) dB Min. and (+10) Max., Phone jack balanced connector
  • Aux Return --- (10)K ohms input impedance and 600 ohms (line) nominal, sensitivity input level (nominal) (-10) dB, Phone jack unbalanced connector
  • Tape IN --- (10)K ohms input impedance and 600 ohms (line) nominal, sensitivity input level (nominal) (-10) dB, RCA jack balanced connector
• Outputs:
  • Stereo Outputs --- 75 ohms impedance and 600 ohms (line) nominal, output level (nominal) (+4) dB , Phone jack connector
  • Aux. Send --- 75 ohms impedance and 600 ohms (line) nominal, output level (nominal) (+4) dB , Phone jack connector
  • Monitor Out ---- 75 ohms impedance and 600 ohms (line) nominal, output level (nominal) (+4) dB , Phone jack connector
  • Record Out --- 600 ohms impedance and 10 ohms (line) nominal, output level (nominal) (-10) dB , RCA jack connector
• General:
  • Maximum Output Level ---- (+20) dB Stereo and Aux Send  @ 600 ohms, at 1kHz
  • Total Harmonic Distortion --- <0.1% @+14 dB 20Hz-20kHz
  • Frequency Response --- 20Hz- 20kHz
  • Hum and Noise --- (-100) dB
  • Cross talk --- (-70 dB) @ 1Khz
  • Cain Control --- (46) dB Variable range
  • Stereo Out Graphic EQ --- (+- 12) dB @ 100, 400, 1k, 5k, 10kHz
  • Channel PEAK Indicator --- Red LED on each channel lights when post EQ signal reaches 3dB below clip level
  • AC Power --- 120 V, 60Hz
  • Warranty --- three years parts and labor if available, one year required

09/25/00